$169.00

Plug-In-N-Recharge VHF Dual Channel Wireless Microphone System

Features and Specifications

• VHF Band Frequency
• Recharge Mechanism Built-in on the Receiver
• Balanced and Unbalanced Audio Outputs
• Full Rack Case with Power and RF Indicators
• Fluorescence Display
• RF Input with Built-in RF Preamplifier to Improve S/N Ratio, Sensitivity and Dynamic Range
• Low Noise Mixer Circuitry for Reducing interference
• 120V-240V AC Power Supply
• Carrier Frequency Range: VHF Band
• Frequency Stability: ± 0.005%
• Receiving Sensitivity: 97 dBm
• S/N Ratio: 70dB
• T.H.D.: < 1%
• Audio Output: 1/4" and XLR (0 – 500mV @ 4.7Kohms)
• Dim: 12.8"W x 2.1H" x 7.9"D
• Weight: 5 Lbs.

• VHF Band Frequency
• Recharge Mechanism at the Base of the Handheld Microphone
• High Sensitivity Cardioid Microphone Capsule
• Noise Reduction Mechanism for Eliminating Handling Noise and Switch Shock Noise
• Low Battery LED Indicator

******************************************************************************************

$99.00

ATW-202 Wireless HandHeld Microphone System ATW-R200 receiver and ATW-T202 handheld microphone/transmitter      OVERALL SYSTEM SPECIFICATIONS   Operating Frequency VHF high band, 169 MHz to 172 MHz Number of Channels Fixed channel Frequency Stability ±0.005% Modulation Mode FM Maximum Deviation ±15 kHz Operating Range 200' minimum Operating Temperature Range 40° F (4° C) to 110° F (43° C) Frequency Response 80 Hz to 13 kHz    HANDHELD TRANSMITTER SPECIFICATIONS   RF Power Output 10 mW High position, 2 mW Low position, typical Spurious Emissions Under federal regulations Dynamic Range >=90 dB, A-weighted Microphone Element Dynamic unidirectional Battery 9V (NEDA type 1604) alkaline, not included Current Consumption 30 mA typical Battery Life Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) Dimensions 9.50" (241.3 mm) long, 2.10" (53.3 mm) diameter Net Weight 12.7 oz (360 g)

200 Series Freeway VHF Wireless Systems Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element. Advanced dipole antenna system   Available in three traveling frequencies   Removable docking power supply inserts into back of receiver   Adjustable squelch control   ATW-T202 handheld microphone/transmitter features a rugged dynamic unidirectional element    RECEIVER SPECIFICATIONS   Receiving System Non-diversity, single-channel, dual antenna system Image Rejection 50 dB minimum Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz) Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted) Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) Output Connector 1/4" TS ("mono") phone jack Power Supply 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply Dimensions 8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D Net Weight 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g) Accessories Included AD1202A 120V docking AC adapter; 120V AC IEC cordset